01
Safety Information
3
English
Precautions
•
Ensure that the AC power supply in your house
complies with the identification sticker located
on the back of your product.
•
Install your product horizontally, on a suitable
base (furniture), with enough space around it for
ventilation (7.5~10cm).
•
Do not place the product on amplifiers or other
equipment which may become hot. Make sure
the ventilation slots are not covered.
•
Do not stack anything on top of the product.
•
Before moving the product, ensure the Disc
Insert Slot is empty.
•
During thunderstorms, disconnect the AC
plug from the wall outlet. Voltage peaks due to
lightning could damage the product.
•
Do not expose the product to direct sunlight
or other heat sources. This could cause the
product to overheat and malfunction.
•
when the mains plug or appliance coupler shall
remain readily operable.
•
Protect the product from moisture, and excess
heat or equipment creating strong magnetic or
electric fields (i.e. speakers.).
•
Disconnect the power cable from the AC supply
if the product malfunctions.
•
Your product is not intended for industrial use. It
is for personal use only.
•
Condensation may occur if your product or
disc has been stored in cold temperatures. If
transporting the product during the winter, wait
approximately 2 hours until the product has
reached room temperature before using.
•
The batteries used with this product contain
chemicals that are harmful to the environment.
Do not dispose of batteries in the general
household trash.
•
Place the loudspeakers at a reasonable distance
on either side of the system to ensure good
stereo sound.
•
Direct the loudspeakers towards the listening
area.
•
Do not expose this apparatus to dripping
or splashing. Do not place objects filled
with liquids, such as vases, on the
apparatus.
•
To turn this apparatus off completely, you
must disconnect it from the wall outlet.
Consequently, the wall outlet and power
plug must be readily accessible at all
times.
•
Use only a properly grounded plug and
receptacle.
- An improper ground may cause electric shock
or equipment damage. (Class l Equipment
only.)
Disc Storage & Management
•
Holding Discs
- Fingerprints or scratches on a disc may
reduce sound and picture quality or cause
skipping.
- Avoid touching the surface of a disc where
data has been recorded.
- Hold the disc by the edges so that fingerprints
will not get on the surface.
- Do not stick paper or tape on
the disc.
•
Cleaning Discs
- If you get fingerprints or dirt on a disc, clean
it with a mild detergent diluted in water and
wipe with a soft cloth.
- When cleaning, wipe gently from the inside to
the outside of the disc.
•
Disc Storage
`
Do not keep in direct sunlight.
`
Keep in a cool ventilated area.
`
Keep in a clean, protective
jacket and store vertically.
MX-HS6800-ZN-ENG-20140429.indd 3
2014/8/13 14:19:20
