E-
2
Safety Precautions
Do not attempt to install or repair this wired remote
controller by yourself.
This remote controller contains no user-serviceable parts.
Always consult authorized service personnel for repairs.
When moving, consult authorized service personnel for
disconnection and installation of the remote controller.
Ensure that the wall is strong enough to support the
weight of the remote controller.
Must install the remote controller with rated power
supply.
In the event of a malfunction (burning smell, etc.),
immediately stop operation, turn off the electrical
breaker, and consult authorized service personnel.
WARNING
CAUTION
Do not use inflammable gases near the remote
controller.
Do not spill water into the wired remote controller.
Do not operate the remote controller with wet hands.
Do not install the remote controller in a location where
it will come into contact with the combustible gases,
machine oil, sulphide gas, etc.
Do not press buttons with a pointed thing.
Do not pull or bend the wired remote controller cable
excessively.
Do not use this wired remote controller for other
purpose.
Do not spray an insecticide or other combustible things
on the wired remote controller.
Do not clean the wired remote controller with benzene,
solvents or other chemicals.
Do not give a shock to the wired remote controller or
disassemble it by yourself.
•
Before using the wired remote controller, read carefully these instructions.
•
After reading the instructions, keep this user's manual in a handy and safe place.
If a user is changed, you must hand over the manuals.
•
Never attempt to install the air conditioning system or to move the wired remote
controller by yourself.
MWR-WH00_IB_E_31218-1.indd 2
2009-12-14 ｿﾀﾀ・9:46:53
