Samsung MWR-WE13N, Installation Manual

Page: 19 / 24

19 English 19
Se
rvic
e Mode
Main
menu
Sub
menu
Function
Data
bit
Factory
setting
Description Unit
2
1 Software code 1~6 - Software code -
2 Software version 1~6 - Software version -
3
1 Indoor unit room temperature 1,2,3 - Room temperature °C
2 Indoor unit EVA IN temperature 1,2,3 - EVA IN temperature °C
3 Indoor unit EVA OUT temperature 1,2,3 - EVA OUT temperature °C
4 Indoor unit EEV step 1,2,3 - EEV step -
5
Indoor unit option checking
(1)
Use of central control 1 - 0 – No use, 1 - Use -
Use of drain pump 2 - 0 – No use, 1 - Use -
Use of electric heater 3 - 0 – No use, 1 - Use -
Use of hot water coil 4 - 0 – No use, 1 - Use -
6
Indoor unit option checking
(2)
Use of external control 1 - 0 – No use, 1 - Use -
Use of RPM compensation 2 - 0 – No use, 1 - Use -
Filter time 3 - 0 – 2000 hours, 1 – 1000 hours -
Heating temperature
compensation
4 - 0-2 °C, 1-5 °C -
EEV stop step in heating 5 - 0 – 1/80 steps, 1 – 80 -
4
1
Indoor unit/Ventilator (ERV)
option setting 2)*
Setting/Checking the address
1,2 - MAIN address (00H~4FH) -
3,4 - MAIN address (00H~4FH) -
5,6 - Group address (00H~FEH) -
2
Setting/Checking the product
option
1)* -
Refer to the installation manual
of the connected indoor unit/
ventilator (ERV)
-
3
Setting/Checking the
installation option 1
1)* - -
4
Setting/Checking the
installation option 2
1)* - -
7 MCU/Port address setting 1,2,4 -
MCU address (00 to 15)
Port address (A to F)
-
5
1 Mini AHU setting/checking
RPM setting/checking 3,4 - 0~31 steps 1 step
Humidity setting/checking 6 - 0 – 30, 1 - 40, 2 - 50 -
2
Setting/Checking the
discharge temperature of the
indoor unit
Use of discharge
temperature control
1 - 0 – No use, 1 - Use -
Cooling discharge
temperature
3,4 - 8~25 °C (46~77 °F) 1 °C
Heating discharge
temperature
5,6 - 18~43 °C (64~109 °F) 1 °C
3
Fresh Duct discharge
temperature checking
Cooling discharge
temperature
1,2 - 13~25 °C (55.4~77 °F) 1 °C
Heating discharge
temperature
3,4 - 18~30 °C (64~86 °F) 1 °C