E-
23
ENGLISH
Setting the Auto Stop Function
The multi function wired remote controller can be set to turn
off the indoor unit(s) after a set period of time has passed
since any button on the remote controller was last pressed.
This function is used to turn off the indoor unit in case the user
forgets to turn off the indoor unit.
1
Press the
button for 3 seconds to enter the setup
mode.
Result:
The multi function wired remote controller will
enter the setup mode and the menu will
display .
2
Press the
button to enter the auto stop time setup
mode.
3
Press the
buttons to set the auto stop time.
Result:
Time is adjusted by 1 hour when the
buttons are pressed.
The default time setting is 0. The auto stop
time can be set between 0 and 12 hours.
If you select 0, auto stop function will be
canceled.
4
Press the
button to complete the auto stop function.
Result:
Auto stop function is set.
Note
To cancel the auto stop function, press the
button.
5
Press the
button.
Result:
Menu selection display will end.
Note
The air conditioner stops automatically after
controlling indoor unit or ERV unit by pressing the
,
,
,
,
,
,
,
buttons.
MWR-WE00_IB_E_30794-1.indd 23
2009-06-22 ｿﾀﾈﾄ 2:37:03
Summary of Contents for MWR-WE00
Page 27: ...E 27 ENGLISH Memo ...
Page 28: ......
