E-
4
Getting Started
You have just purchased a wired remote control and it has been
installed by your installation specialist.
Your User’s Manual contains much valuable information on using your
wired remote control. Please take time to read it as it will help you take full
advantages of the unit’s features.
In the manual, you will find a series of step-by-step procedures for each
function available.
The illustrations in the step-by-step procedures use 3 different symbols:
PRESS
PUSH
HOLD DOWN
Wired Remote Control
The wired remote control is installed on the wall.
What the function indicators mean
Filter sign indicator
On : The filter inserted in the air conditioner needs to be cleaned. Clean up the filter
and reset the indicator by pressing the
buttons at once for 5 seconds.
Off : The filter inserted in the air conditioner is working well.
No action needed.
Mode lock indicator
On : The mode lock function is activating. You can not change the operation mode.
Press and hold the
and
buttons for 5 seconds to activate and
deactivate the function.
Off : The mode lock function is deactivating. You can change the operation mode
by short pressing the
button.
You cannot activate the function with slave wired remote controls. Slave
wired remote controls just display the activating status only.
Centralized control indicator
On : The upper controllers (For example, centralized controllers and S-NET series)
activate central control. You cannot control the devices with the wired remote
control when central control is activating.
Off : Central control is deactivating. You can control the connected devices with the
wired remote control.
Operation mode indicator
Temperature indicator
Fan speed indicator
On/Off button
Mode selection button
Fan speed button
Temperature adjustment buttons
Function indicator
MWR-SH00_IB_E_28134.indd 4
2007-07-03 ｿﾀﾈﾄ 6:03:12
