5
GB
Installing Your Microwave oven
Place the oven on a flat, level surface that strong enough to safely bear
the weight of the oven.
☛
Never block the air vents as the oven may overheat and
automatically switch itself off. It will remain inoperable until it has
cooled sufficiently.
☛
For your personal safety, plug the cable into a 3-pin, 240 Volt,
50Hz, AC earthed socket. If the power cable of this appliance is
damaged, it must be replaced by a special cable. Contact your
local dealer to have it replaced.
☛
Do not install the microwave oven in hot or damp surroundings
like next to a traditional oven or radiator. The power supply
specifications of the oven must be respected and any extension
cable used must be of the same standard as the power cable
supplied with the oven. Wipe the interior and the door seal with a
damp cloth before using your microwave oven for the first time.
Setting the Time
✉
If there is a power interruption, you will need to reset the clock.
✉
You can check the current time while cooking is in progress by pressing
the Clock button.
1.
When you install your oven, Make sure there is adequate
ventilation for your oven by leaving at least 10 cm (4
inches) of space behind, on the sides of the oven and 20
cm (8 inches) of above.
2.
Remove all packing materials inside the oven.
Install the roller ring and turntable.
Check that the turntable rotates freely.
3.
This microwave oven has to be positioned so that plug is
accessible.
20 cm
above
10 cm
behind
10 cm
of the side
1.
Press the Clock button.
The display will show : 0
2.
Use the Number buttons to enter the current time.
You must press at least three numbers to set the clock
If the current time is 5:00 enter, 5,0,0.
The display will show : 500
3.
Press Clock button again. A colon will appear, indicating
that the time set.
The display will show : 5:00
t~^ZW~hniUGGwG\GGz SGq GX^SGYWW[GGYaW\Gwt
