Samsung Moment, User Manual

Page: 164 / 224

150 3B. Web and Data Services
2. Tap the
Wi-Fi
field to activate the feature
(checkmark indicates active). The device will scan
for available in-range wireless networks.
To turn Wi-Fi off:
1. Press
>
and tap
>
Wireless & networks > Wi-Fi .
2. Tap to remove the green checkmark and
deactivate Wi-Fi.
To connect to a Wi-Fi network:
1.
Press
>
and tap
>
Wireless & networks > Wi-Fi settings.
䡲
The network names and security settings (Open
network or Secured with WEP) of detected Wi-Fi
networks are displayed in the Wi-Fi networks
section.
2. To manually add your new network connection:
䡲
Touch
Add Wi-Fi network
.
䡲
Enter the Network SSID. This is the name of your
Wireless Access Point.
䡲
Tap the
Security
field and select a security option.
This must match the current security setting on
your target WAP.
䡲
If secured, you will also need to enter your WAP’s
password. The
show password option , reveals the
password as you type it vs only showing asterisks
(****).
䡲
Tap Save to store the new information and
connect to your target WAP.
Note:
Use of wireless data connections such as Wi-Fi and
Bluetooth can cause an added drain to your battery
and reduce your use times.
Note:
When you select an open network, you will be
automatically connected to the network.
Note:
The next time your device connects to a previously
accessed or secured wireless network, you are not
prompted to enter the WAP key again, unless you reset
your device back to its factory default settings.
SPH-M900.book Page 150 Thursday, May 20, 2010 7:36 PM