GB
9
The AM antenna (for medium waves) can be:
Placed on a stable surface
Fixed to the wall (you must first remove the base)
The
AM
antenna connector terminals are located on the rear of the system and are marked
AM ANT
.
To avoid noise interference, check that the loudspeaker wires do not run close to the
antenna wires.
Always keep them at least 2 inches (5 cm) away.
Connecting the AM (MW)Antenna
How to connect a COAXIAL TYPE antenna.
Connect a 75
Ω
antenna to the
FM
antenna terminal.
Plug the connector on the supplied
FM
antenna supplied into the coaxial socket (75
Ω
) marked
FM
on the rear of the system.
Follow the instructions given on
Page 15
to tune into a radio station, and determine the best position for the antenna.
If reception is poor, you may need to install an outdoor antenna.
To do so, connect an outdoor
FM
antenna to the
FM
socket on the rear of the system using a 75
Ω
coaxial cable (not supplied).
Connecting the FM Antenna
GB
8
The auxiliary input can be used to take advantage of the sound quality
of your micro component system when listening to other sources.
Examples: A
television
A DVD player
A VCR
To connect to the external source, the source must have an audio
output. In addition, you need an RCA connection cable.
Set the system to standby mode and disconnect it and the external
source from the main socket.
Connect the audio cable to the rear of the micro component system.
Connect the...
To the connector marked...
Red jack
R (right)
White jack
L (left)
For optimum sound quality, do not invert the right and left
channels.
Plug the system back into the main socket and press ( ) to
switch it on.
Select the AUX source by pressing
AUX
.
Result:
AUX
is displayed.
Switch the external source on.
Example: You can watch a film and take advantage of stereo sound
provided that the original sound track is in stereo (as if you
were in a cinema).
Connecting to an External Source
1
2
3
4
5
Speaker Connection
Directions in Installing Speaker
Installation in a place near heating apparatus, under direct lay of
light or with high humidity may cause performance degradation
of the speaker.
Do not install on the wall or on a high place of pole or other
unstable place to prevent any safety accident caused by falling
of the speaker.
Do not take the speaker apart from TV or computer monitor.
The speaker near the TV or computer monitor may influence the
quality of the screen display.
(Right Speaker)
(Left Speaker)
AM
L
R
L
R
AM
L
R
L
R
AM
L
R
L
R
AM
L
R
L
R
Main Speaker Connection: Connect the Speaker cords (red/black) to
the Main Speaker jacks of System.
AM
L
R
L
R
L
R
MM-X8(GB)-ELS-9.28 9/28/07 11:22 Page 8
