GB
10
Your system is equipped with a clock which allows you to turn
your system on and off automatically. You should set the clock:
When you purchase the Micro component system
After a power failure
After unplugging the unit
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
1
Switch the system on by pressing On/Standby.
2
Press Timer/Clock twice.
Result:
CLOCK is displayed.
3
Press Program/Set.
Result:
The hour flashes.
4
To...
Press...
Increase the hours
ö
Decrease the hours
õ
5
When the correct hour is displayed, press Program/Set.
Result:
The minutes flash.
6
To...
Press...
Increase the minutes
ö
Decrease the minutes
õ
7
When the correct time is displayed, press Program/Set.
Result:
The clock starts and is displayed, even when the
system is in standby mode.
You can display the time, even when you are using another
function, by pressing Timer/Clock once.
You can play 12 cm or 8 cm compact discs without an adapter.
This unit has been designed to playback the CDs: Audio CD, CD
Text, CD-R and CD-RW.
Continued use of irregular shape CDs (heart-shape, octagonal,
etc.) can damage the unit.
1
Select the CD function by pressing FUNC. button.
2
Press the Open/Close ( ) button on the front panel.
Result:
The compartment opens.
3
Place your disc in the compartment, with the label on the disc
facing upwards.
4
Close the compartment by pressing the Open/Close ( )
button again.
Result:
The display indicates the number of tracks
on the disc.
5
Press the PLAY/PAUSE (
ˆ ¨
) button.
Result:
The first track on the disc plays and the track
number is displayed.
6
To stop playback temporarily, press the PLAY/PAUSE (
ˆ ¨
)
button.
Press PLAY/PAUSE (
ˆ ¨
) again to continue playing
the disc.
7
Press the STOP (
■
) button when you have finished.
Setting the Clock
Listening to a Compact Disc
On/Standby
Sleep
CD/TAPE/MP3
Mono/ST.
Band
Function
Tape
Mode
Program/
Set
Repeat
Timer
on/off
Timer/
Clock
Preset
EQ
Power
Sound
Mute
VOL.
VOL.
Tuning
Mode
2
1
7
4
4
6
6
3 5
CD/TAPE/MP3
Band
Function
Volume
FUNC.
CD/TAPE/TUNING
R
Tuning Mode
CD Repeat
Repeat A B
Preset EQ
+10 (CD)
Record
Start/Stop
Band
PROG./Set
CD Synchro
CD Door Open/Close
7
1
7
5 6
5 6
When playing a CD-R or CD-RW
User-edited CD-Rs (Recordable) and CD-RWs (Rewritable)
can be played back only if they are already “finalized”.
◆
You can play back your original CD-Rs or CD-RWs recorded
in music CD format. (However, they may not be played back
depending on their characteristics or recording conditions.)
◆
Some CD-Rs or CD-RWs may not be played back on this unit
because of their disc characteristics, damage or stain on them,
or if the player’s lens is dirty.
◆
CD-RWs may require a longer readout time. (This is caused
by the fact that the reflectance of CD-RWs is lower than for
regular CDs.)
2 4
MM-L5000-NO RDS(GB) 5/19/03 19:15 Page 10
