GB
SETUP
45
46
•
You can display the time, even when you are using another function, by pressing
TIMER/CLOCK
once.
•
CLOCK
is displayed.
2
Press
TIMER/CLOCK
twice.
1
Switch the system
on by pressing
POWER
button.
•
"
TIMER
" appears in the display.
•
The current time is now set.
5
When the correct
time is displayed,
press
ENTER
.
•
Increase the minutes :
•
Decrease the minutes :
4
When the correct
hour is displayed,
press
ENTER
.
The minutes flash.
•
Increase the hours :
•
Decrease the hours :
3
Press
ENTER
.
The hour flashes.
Note
For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
Setting the Clock
•
"DSP" appears on the display panel.
•
Each time the button is pressed, the selection changes as follows:
POPS, JAZZ, ROCK:
Depending on the genre of music, you can select POP, JAZZ, and ROCK.
STUDIO
: Provides a sense of presence as if in a studio.
CLUB
: Simulates the sound of a dance club with a throbbing bass beat.
HALL
: Provides a clear vocal as if listening in a concert hall.
MOVIE:
Provides the feeling of a movie theater.
CHURCH:
Gives the feel of being in a grand church.
PASS:
Select this for normal listening.
Press
DSP/EQ
button.
•
DSP/EQ function is only available in STEREO mode.
•
This feature works with CDs, MP3-CDs, 2 channel DVD-Audio, DivX and
Dolby Digital discs.
•
When playing a DVD disc encoded with two or more channels,
multi-channel mode will be selected automatically and DSP/EQ function
does not work.
Note
DSP(Digital Signal Processor) DSP modes have been designed to simulate different acoustic environments.
EQ: You can select ROCK, POP, or CLASSIC to optimize the sound for the genre of music you are playing
Sound Field (DSP)/EQ Function
35P~64P(DT10)-GB 2003.3.29 12:44 PM Page 44
