Samsung MM-DC10, Instruction Manual

Page: 25 / 33

GB
Example: You wish to wake up to music every morning.
•
ON TIME
is displayed (instead
of the equalizer symbols) for a
few seconds, followed by any
switch-on time already set; you
can set the timer switch-on time.
•
The source to be selected is
displayed.
2 1
3
Switch the system
on by pressing
POWER.
Press TIMER/
CLOCK until
TIMER is
displayed.
Press the ENTER
button.
7
Press or button
to select the source
to be played when
the system switches
on.
5
4
a. Set the hour by pressing or
button.
b. Press ENTER.
•
The minutes flash.
c. Set the minutes by pressing or
button.
d. Press ENTER.
•
OFF TIME is displayed (instead
of the equalizer symbols) for a few
seconds, followed by any switch-
off time already set; you can now
set the timer switch-off time.
•
USB : Connect a USB cable.
•
TUNER (FM, AM) :
a Press ENTER.
b Select a preset station by pressing
Tuning or .
•
DVD/CD : Load a compact disc.
a. Set the hour by pressing or
button.
b. Press ENTER.
•
The minutes flash.
c. Set the minutes by pressing or
button.
d. Press ENTER.
•
VOL 20 is displayed, where 10
corresponds to the volume
already set.
Set the timer
switch-off time.
6
Press or
button to adjust
the volume level
and press ENTER.
Set the timer
switch-on time.
Note
•
is displayed to the top-right
of the time, indicating that the
timer has been set.
•
The system will switch on and off
automatically at the required
times.
8
9
Press ENTER to
confirm the timer.
Press POWER to
set the system to
standby mode.
•
If the timer switch on and off times are identical, the word ERROR is displayed.
•
If you no longer want the system to be switched on or off automatically, you must cancel the timer.
•
Before setting the timer, check that the current time is correct.
•
For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
•
In standby mode, you can press MULTI JOG(PUSH ENTER) button instead of ENTER button and press
buttons or turn MULTI JOG(PUSH ENTER) knob on the front panel instead of , buttons on the remote control
in step 4,5,6,7.
The timer enables you to switch the system on or off at specific times.
Timer Function
47 48
SETUP