GB
Switch the system on by pressing Standby/On ( ) .
Select the TAPE function by pressing TAPE on the front panel.
Open the cassette deck by pushing on the corner of the cover marked PUSH
EJECT until you hear a click and then release it.
Insert the pre-recorded cassette with the open edge of the tape facing
downwards.
Close the deck by pushing on it until it clicks into place.
Press the TAPE(
) button.
Side A
TAPE (
) once
Side B
TAPE (
) twice
Result: The cassette starts playing.
Press TAPE SPEED to adjust the speed of the tape playing.And each
time the button is pressed,the mode changes as follows.
When the cassette is stopped, select one of the following functions as
required.
To... Press...
Rewind the cassette...................
/
Fast-forward the cassette...........
/
The cassette player stops automatically when the beginning or end of
the cassette is reached.
To stop the playback or search, press Stop (
) button.
16
Listening to a Cassette
The direct recording mode enables you to start recording with
any track on the compact disc.
You do not need to adjust the volume, as it has no effect on the recording.
Switch your system on by pressing Standby/On ( ) .
Insert a blank cassette in Deck.
Load a compact disc.
Press the MP3-CD(
) button.
Use the CD selection (
,
) buttons to select the desired song.
Press the REC/PAUSE button.
Result: Recording will begin.
To stop recording, press Stop (
)button.
1
2
3
4
5
6
Direct recording
1
2
3
4
5
6
7
8
Recording a Compact Disc
-10%SPEED
+10%SPEED NORMAL
9
17
Your micro component system has three cassette playback
modes which enable you to listen to both sides of a cassette
automatically.
Press REV.Mode until the appropriate symbol is displayed.
When the display indicates...
The micro component system plays
back...
One side of the selected cassette and
then stops.
One side of the cassette.
The other side of the cassette and then
stops.
Both sides of the cassette indefinitely until
you press stop.
Selecting the Cassette
Playback Mode
When playing a cassette, a counter is displayed to enable you to
take note of the counter value at the start of each track and thus
start playback at the beginning of the track to which you wish to
listen.
The counter is only displayed when a cassette is being played.
Before starting to record a cassette for which you wish to take note
of the counter values at the beginning of each track, reset the
counter by pressing COUNTER RESET.
Tape Counter
GB
9
3,5
2,6
1
8
8
9
You can record a compact disc on a cassette in two different ways:
Synchronised recording
Direct recording
This feature enables you to synchronize the start of the
recording with the start of the disc or track of your choice.
Switch the system on by pressing ( ) .
Insert a blank cassette in Deck.
Press the PUSH/EJECT button (
) to open the cassette door,
insert a cassette, and then close the cassette door.
Insert the cassette with the safety tabs.
Load a compact disc.
Press the OPEN/CLOSE button (
) to open the CD door.
Insert a CD and press the OPEN/CLOSE button (
) to close
the CD door.
Press the MP3-CD(
√
/
»
) button.
Use the CD selection (
,
) buttons to select the desired song.
Press and hold CD SYNCHRO button.
When stopped, press the button to start the recording from the
first piece of music.
Press and hold CD SYNCHRO button during the playback of CD
to start the recording from the first part of the music being played.
To stop recording, press
button.
Synchronised recording
1
2
3
4
5
6
You can record a radio program of your choice.
You do not need to adjust the volume, as it has no effect on
the recording.
Switch the system on by pressing Standby/On ( ) .
Insert a blank cassette in Deck.
Select the TUNER function by pressing TUNER/BAND.
Select the radio station that you wish to record by pressing
or
button on the front panel or
or
on the remote control.
Press REC/PAUSE.
Result:
REC
is displayed and recording starts.
To stop recording, press STOP (
)button.
1
2
3
4
5
6
Recording a Radio Program
1
4
6
4
4
5
1
4
6
4
3
5
