ENG
21
22
Disc Playback
OPERATION
•
To resume playback, press
PLAY( )
button again.
To temporarily pause playback, press
PAUSE
button
during playback.
•
If pressed once, the stop position will be stored in memory. If
PLAY
( ) button
is pressed, playback resumes from the stop position. (This function works only with
DVDs.)
•
If pressed twice, “STOP” is displayed, and if
PLAY
( ) button is pressed,
playback starts from the beginning.
To stop playback, press
STOP
button during playback.
2
Load a disc.
•
Place a disc gently into the tray with the disc’s label facing up.
•
For mixed discs, the play order is as below:MP3/WMA
DIVX
JPEG.
•
Depending on the content of the disc, the initial screen may appear different.
•
Depending on the recording mode, some MP3-CDs cannot be played.
•
For CD discs, you can press the numeric buttons to select the track, when you
press the numeric buttons after 3 seconds, the playback starts automatically.
•
Table of contents of a MP3-CD varies depending on the MP3 track format recorded
on the disc.
•
DTS Audio disc is not supported.
•
DVD Audio disc is not supported.
1
Press
OPEN/CLOSE
button to open the
disc tray.
3
Press
OPEN/CLOSE
button to close the disc
tray.
Note
Checking the Remaining
Time
Each time the REMAIN button
is pressed , the time is
displayed as below:
•
For checking the remaining time of a
title or chapter being played.
DVD
CD
MP3
TITLE REMAIN TIME
CHAPTER REMAIN TIME
ELAPSED TIME
If you press the
REMAIN button, the
remaining time is
displayed.
To cancel this function,
press the REMAIN
button again.
1
1
Press the REMAIN
button.
Press the REMAIN
button.
MM-C430D-C530D-i-EUR-ENG-1-NO.indd 24-25
MM-C430D-C530D-i-EUR-ENG-1-NO.indd 24-25
2010-3-10 15:41:37
2010-3-10 15:41:37
