Error status
Check
Solution
- Refer to DCU mode “00”
1. Check the supply voltage. (+24
Vdc)
1. Replace to cover open unit.
Engine board CN1 -2,5 pin
2. Replace cable
2. Check the Motor cable for cuts or
3. Replace Motor.
pinched wiring.
4. Replace Engine board.
Main Motor
3. Check the resistance for Motor between
5. Replace Motor Drive Unit
pin No. 1 to 3(4 to 6)
- Refer to “4-6, 6-9”
The resistance of motor : 3
•
ÿ
approx.
4. Check the Engine board.
5. Check Gear of Motor Drive Unit.
- Check all the gear for correct
installation.
1) 1’st Cassette Feeder
1. Check the paper empty sensor
1. Replace the paper empty sensor on
- Refer to DCU mode “07”
Engine board.
2. Check the paper empty sensor actuator.
2. Replace paper empty sensor actuator.
2) Multi Purpose Feeder
1. Check the paper empty sensor for MP.
1. Replace MP sensor assembly.
Paper Empty
- Refer to DCU mode “07”
2. Replace MP paper empty sensor
2. Check the MP paper empty sensor
actuator.
actuator.
If not improved, replace
the engine board
3) Second Cassette Feeder
1. Check the paper empty sensor for SCF
1. Replace the paper empty sensor on
- Refer to DCU mode “07”
S.C.F board.
2. Check the paper empty sensing actuator
2. Replace MP paper empty sensor
for SCF.
actuator.
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
