background image

In July of 2000, NEC released a new family of printers, the

SuperScript 1400, 1450, and the 1450N all using a new
Samsung ML-6060 engine. Two months later Xerox and IBM
released the Xerox DocuPrint P1210 and the IBM InfoPrint 12
each using the same Samsung engine. These machines are
capable of printing 12 pages per minute and have a first page
out speed of 14 seconds.

The new Samsung ML-6060 engine utilizes a new mono-

component, all-in-one toner cartridge. Even though the car-
tridges use the same internal components, a molding difference
on the from of the waste hopper prevents the cartridges from
being used in the different machines. 

Both Xerox and NEC sell two different yield cartridges, a

3,000 pages standard yield cartridge and a 6,000 page high
yield cartridge, while IBM only sells the high yield version.

In 2001 Xerox and Samsung released another series of print-

ers using the Samsung ML-1650 engine. The Xerox Phaser
3400, 3400B, 3400N and the Samsung ML1650, 1651N printers
print 17 pages per minute and have a first page out time of 12
seconds.

The cartridges for these printers are very similar to the

ML6060, they use same components and the remanufacturing

process is almost the same.  The only difference in the process
has to do with the gear assembly that turns the developer roller.

A small drive belt is found on the gear and must be placed

back onto the drive gear during the reassembly of the cartridge.
See Figure 1. The ML1650 cartridges also hold more toner than
the ML6060 and can 8,000 pages at 5% coverage with the high
yield cartridge and 4,000 pages at 5% coverage with the low
yield cartridge 

Future Graphics (FG) is a distributor of compatible replacement parts and products for imagining equipment.

None of FG's products are genuine OEM replacement parts and no affiliation or sponsorship is to be implied between FG and any OEM.

Machine Model 

OEM Number

Engine

IBM Infoprint 12

01P6897

Samsung ML-6060

NEC Superscript 1400

20-150

Samsung ML-6060

NEC Superscript 1450

20-150

Samsung ML-6060

NEC Superscript 1450N

20-150

Samsung ML-6060

Samsung ML-1440

ML6060D6

Samsung ML-6060

Samsung ML-1450

ML6060D6

Samsung ML-6060

Samsung ML-1451N

ML6060D6

Samsung ML-6060

Samsung ML-6040

ML6060D6

Samsung ML-6060

Samsung ML-6060

ML6060D6

Samsung ML-6060

Samsung ML-6060N

ML6060D6

Samsung ML-6060

Samsung ML-6060S

ML6060D6

Samsung ML-6060

Xerox Docuprint P1210

106R442

Samsung ML-6060

Xerox Phaser 3310

106R646

Samsung ML-6060

Samsung ML-1650

ML1650D8

Samsung ML-1650

Samsung ML-1651N

ML1650D8

Samsung ML-1650

Xerox Phaser 3400

106R462

Samsung ML-1650

Xerox Phaser 3400B

106R462

Samsung ML-1650

Xerox Phaser 3400N

106R462

Samsung ML-1650

Summary of Contents for ML-6060












Reviews: