Samsung ML-4600, User Manual

Page: 123 / 134

A
PPENDIX
A. 26
Printing from DOS Applications
CONFIG
• Power Save determines the length of time the printer waits
after a job is printed before it goes to a reduced power state.
If the printer is used frequently, select
OFF which keeps the
printer ready to print with the minimum warm-up time. This
uses more electricity to keep the printer warm and ready to
print.
• Econo Mode determines the toner quantity the printer
should use when printing. If set to ON , the printer conserves
toner when printing. The default value is OFF , which
provides 100% usage.
• Auto Continue determines what action the printer should
take when a manual feed print job is sent to the printer and
there is no paper in the Manual input tray. If set to
ON , the
printer will pick up the paper from the Automatic input tray
after fifteen seconds. Otherwise, the printer will wait for you
to load paper in the Manual Tray.
• Jam Recovery determines what action the printer should
take when a paper jam occurs. When set to OFF , the printer
does not reprint a page that has jammed. When set to ON ,
the printer keeps the image in memory for a printed page
until the printer signals that the page has successfully
printed. The printer reprints all jammed pages.
• Altitude With this option checked, you can optimize the print
quality for a low pressure area, such as a high ground.
JOB
• Timeout determines the amount of time (in seconds) the
printer will wait before printing the last page of a print job
that does not end with a command to print the page or a
formfeed character. Valid range is 0 to 300 seconds.
• Paper Type provides the printer with information about the
type of paper to be used for a print job. For the best result,
set this to the paper type you loaded in the paper tray in the
printer. When using the plain paper, set this to
Default .
• SRT Mode makes the printer optimize the print quality to
1200 dpi class image quality.