Samsung ML-451 Series Service Manual Download Page 204

Page: 204 / 241

4. Alignment and Troubleshooting

► Error Code

S2–4210

► Error message

Front door is open. Close it.

► Symptom

The front door is open./ The front door is closed but this error does not disappear.

► Troubleshooting method

1) Picture1 — No.1 : Check if the switch contact on the door is deformed.

2) Picture2 — No.1 and 2 : Check if the harness connection is normal.

3) Picture2 — No.3 : Check if the micro switch is assembled with hook.

4) Picture3 — No.1 : Open the front cover. Check if the message is changed when pushing the mirco switch.

5) If the micro switch does not work normally, check that its lever is deformed. If it is defective, replace it.

4-103

Summary of Contents for ML-451 Series














































































































































































































































Search results

Summary of Contents for ML-451 Series

Reviews:

Samsung ML-451 Series, Service Manual, Page: 204 / 241

Search results

Summary of Contents for ML-451 Series

Reviews: