manualshive.com logo in svg

Samsung ML-2250/XBG, Service Manual

Share
Download
Samsung ML-2250/XBG Service Manual Download Page 30

4-9

Samsung Electronics

Summary of product

Service Manual

4.2.8 Toner Cartridge

The toner cartridge is an integral unit containing the OPC unit and toner unit. The OPC unit consists of the OPC
drum and charging roller, and the toner cartridge unit consists of the toner, supply roller, developing roller, and
blade (Doctor blade)

- Developing Method: Non magnetic 1 element contacting method
- Toner: Non magnetic 1 element shatter type toner
- The life span of toner: 5,000 sheets (ISO19752 standard)
- Toner remaining amount detecting sensor: No
- OPC Cleaning: Film OPC using an electro-static cleaning process.
- Management of waste toner: Collected using an electro-static process and retained within the toner cartridge

--> no waste toner to dispose of.

- OPC Drum protecting Shutter: No.
- Classifying device for toner cartridge: ID is classified by interruption of the frame channel.

Summary of Contents for ML-2250/XBG



























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands