E-
30
Check the RS485 Circuit of PIM itself for Test or Service
PIM Menu Description (Continued)
Main Menu
3.Check
1
Access to main menu by pressing the [Menu] button from the normal display.
Then select ‘3. Check’ by pressing the [
], [
] buttons, and press the [Set] button.
2
Select ‘3.2 COM’Check’ by pressing the [
], [
] buttons and
then press the [Set] button.
Inspect the packet transmission/reception status with DMS.
COM’ Check End
OK
3
Communication inspection result will be displayed. (OK/NG)
4
After the inspection, press the [Menu] button to move to upper menu or
cancel the setting.
All menus will return to the normal display if there is no input for 1 minute.
3.Check
3.2 COM’ Check
COM’ Check Start
Checking...
You can check if the RS485 circuit is normal when you have
doubt the main board.
Before checking, connect COM1 and COM2 terminal with wire
as you see the right figure.
MIM-B16_PIM_IM_E 32320-1.indd 30
2010-05-20 ｿﾀﾈﾄ 7:19:07