E-
7
ENGLISH
Installing the SIM (Serial Input Module)(Continued)
Setting the SIM (Serial Input Module) address
1
Unscrew the 4 screws on the SIM (Serial Input Module) to
open the cover.
2
Use the rotary switch (DS01) on SIM to set the
communication address.
The address of SIM can be set from 0 to 7.
The default switch is set as '0'.
The address of SIM is set according to the switch setting
when powered on. If the rotary switch is adjusted after the
power is supplied, the adjusted address is not reflected.
To set the adjusted address for rotary switch, unplug the
power cable and plug it again.
Caution
Power
cable
(DC 12V)
SIM I/M
communication
cable
Connect
to DMS
SIM_MIM-B12_EN_IM_26745A-04.indd 7
2014-05-09 오후 5:31:42
