E-
12
Connecting the Cables to the Outdoor Unit
Two electric cables must be connected to the outdoor unit:
◆
The assembly cable connecting the indoor unit to the outdoor unit.
◆
The power cable connecting the auxiliary circuit breaker to the
outdoor unit.
1
Remove the terminal board cover on the side of the outdoor unit.
2
Connect the assembly cable with the power cable such as figure.
➢
Each wire is labelled with the corresponding terminal number.
➢
Ensure the wire number of the indoor unit and the terminal
number of the outdoor unit.
3
Connect the earth wires to the earth terminals.
➢
Refer to the page 14 for further details on how to check
that earthing is correct.
4
Replace the terminal board cover, carefully tightening the screw.
5
Connect the power cable to the auxiliary circuit breaker.
I
NSTALLING THE
O
UTDOOR
U
NIT
MH14VA1(A2)(C1)(C2)X
MH18VA1(A2)(C1)(C2)X
MH19VA1(A2)(C1)(C2)X
Summary of Contents for MH14VA1 Seies
Page 2: ...E 2 ...