E-
2
Safety Precautions
The following safety precautions must be taken when using your air conditioner.
◆
The unit should not be installed by the user. Ask the dealer or authorized
company to install the units except room air conditioners for the U.S.A and
Canada area.
◆
If the unit is installed improperly, water leakage, electric shock or fire may
result.
◆
The air conditioner must be installed in accordance with national wiring
regulations and safety regulations wherever applicable.
◆
Mount with the lowest moving parts at least 2.5m above the floor or grade
level. (If applicable)
◆
The manufacturer does not assume responsibility for accidents or injury
caused by an incorrectly installed air conditioner. If you are unsure about
installation, contact an installation specialist.
◆
When installing the built-in type air conditioner, keep all electrical cables
such as the power cable and the connection cord in pipe, ducts, cable
channels e.t.c to protect them against liquids, outside impacts and so on.
WARNING
I
NSTALLING THE UNIT
◆
If the power cord of this air conditioner is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified persons in order to
avoid a hazard.
◆
The unit must be plugged into an independent circuit if applicable or
connect the power cable to the auxiliary circuit breaker. An all pole
disconnection from the power supply must be incorporated in the fixed
wiring with a contact opening of >3mm.
◆
Do not use an extension cord with this product.
◆
If the unit is equipped with a power supply cord and a plug, the plug must
be accessible after installation.
◆
This appliance must be installed accordance with the national wiring
regulations.
P
OWER SUPPLY LINE
,
FUSE OR CIRCUIT
BREAKER
Risk of electric shock.
•
Can cause injury or death.
•
Disconnect all
remote electric power supplies before servicing, installing or cleaning.
•
This must be done by the manufacturer or its service agent or a similar
qualified person in order to avoid a hazard.
MH026FPEA IM_E_20238 1/24/05 5:25 PM Page 2
