background image

E-

23

ENGLISH

Setting the Off Timer

You can set the Off Timer to turn off the air conditioner automatically at  
the appointed time within a range of 30 minutes to 24 hours.

1

Press the 

 button until the desired time is displayed to set  

the Off Timer. You can set the time between 0.5 hour and 24 hours.

3

Press the 

 button to complete the setting.

Result

:

 

 

The remaining time is displayed.  

 

 

The timer indicator stops blinking.  

 

 

 

 The air conditioner turns off automatically at the appointed 

time and the Off Timer setting disappears. 

Example

 

 

If you would like to turn the air conditioner on after 2 hours 

and to operate it for 2 hours during non-operation: 

 

1. Press the 

 button until ‘2.0 Hr’is displayed. 

 

2. Press the 

 button. 

 

3. Press the 

 button until ‘4.0 Hr’is displayed.

 

4. Press the 

 button.

Note

 

 If you would like to turn on the air conditioner and then to turn  

off it automatically at the appointed time by using On/Off Timer 

during operation, you should set the On Timer longer than the  

Off Timer.

Caution

 

 

Make sure that the air conditioner will not continue to run 

after On Timer setting is confirmed.

Note

 

   

You can check or change the mode and/or the temperature 
by pressing the 

 button or the 

 button after setting  

the Off Timer.

 

   If you would like to turn off the air conditioner and then to 

turn on it again automatically at the appointed time by using 

On/Off Timer during non-operation, you should set the  

Off Timer longer than the On Timer.

To Cancel the Off Timer

If you no longer wish to use the Off Timer that you have set, you can
cancel it at any time.

1

To cancel the Off Timer, press the 

 button one or more times until the 

timer setting disappears.

2

Press the 

 button.

Note 

 

 If you want to turn off the air conditioner before the timer  
reaches the setting time, press the 

 button.

FJM_Neo_FORTE_Inv_28925A_IB_E.indd   23

2007-12-3   19:10:26

Summary of Contents for MH052FNEA































Reviews: