E-
23
ENGLISH
I
NSTALLING THE
I
NDOOR
U
NIT
Assigning Address to Indoor Unit
Before installing the indoor unit, assign an address to the indoor unit
according to the air conditioning system plan.
1
The address of the indoor unit is assigned by adjusting MAIN(SW02).
2
The MAIN address is for communication between the indoor unit and the outdoor
unit. Therefore, you must set it to operate the air conditioner properly.
3
It is required to set the RMC address if you install the wired remote control
and/or the centralized control.
4
If you install optional accessories such as the wired remote control, centralized
control, etc. see an appropriate installation manual.
5
If an optional accessory is not installed, you do not have to set the RMC
address. However, adjust K1 and K2 switches of the SW04(SW05)
DIP switch to "ON" position in this case.
6
K1 K2 K3 K4
K5 K6 K7 K8
K9 K10
SW01 MAIN SW02 MAIN SW03 RMC
SW04
SW05
SW06
MH
✴✴✴
FKEA
MH
✴✴✴
FSEA
MH
✴✴✴
FMEA
SW01 MAIN SW02 MAIN SW03 RMC SW04 RMC
SW02 MAIN
SW04 RMC
SW05
SW06
SW07
SW05
SW06
SW07
MH***FKEA IM_E_27682_5 9/10/04 11:39 PM Page 23
