7
General information
#1 and #2 Phillips
screwdriver
Pencil
Ruler or tape measure and
straight edge
Carpenter square (optional)
Tin snips
(for cutting damper,
if required)
Scissors
(to cut template,
if necessary)
Electric drill with
3
/
16
˝,
½˝ and ⅝˝ drill bits
Filler blocks or scrap wood
pieces, if needed for top
cabinet spacing (used on
recessed bottom cabinet
installations only)
Gloves
Saw (saber, hole or keyhole)
Stud finder or Hammer
(optional)
Safety goggles
Level
Duct and masking tape
TOOLS YOU WILL NEED
16 ²⁹∕₃₂˝
30˝
2˝
30˝ min.
Bottom edge
of the cabinet
needs to be 30˝
or more from the
cooking surface.
Backsplash
66˝ or More
from the Floor
to the Top of the
Microwave
NOTES:
• The space between the cabinets must be 30˝ wide and
free of obstructions.
• If the space between the cabinets is greater than 30˝,
a Filler Panel Kit may be used to fill in the gap between
the microwave oven and the cabinets. Your Owner’s
Manual contains the kit number for your model.
• This microwave oven is for installation over ranges up
to 36˝ wide.
• If you are going to vent your microwave oven to the
outside, see the Hood Exhaust Section for exhaust
duct preparation.
• When installing the microwave oven beneath
smooth, flat cabinets, be careful to follow the
instructions on the top cabinet template for
power cord clearance.
MOUNTING SPACE
OTR_II_DE68-03587B-07_EN+CFR.indb 7
OTR_II_DE68-03587B-07_EN+CFR.indb 7
2022-01-20 �� 10:11:52
2022-01-20 �� 10:11:52
