English 13
S
tep-b
y
-s
tep ins
tallation g
uide
Bracket
The marked Brackets should not
have Vent holes.
NOTE
You must check bracket picture according
to ventilation type at page
12
.
NOTE
Apply A1 and A2 equally.
B. Recirculating (non-vented ductless)
B1. Adapting the COVER PANEL for recirculation
Cover
Panel
Back
Panel
1.
Make sure the Cover Panel is
assembled properly. (Top assembly)
A2. INSTALLATION DAMPER
Damper
1.
Remove the tape securing the
Damper.
2.
Assemble the Damper as sliding from
back to front until stopped.
NOTE
Make sure Dampers swing freely.
House Duct
House Duct
NOTE
•
You must attach the House Duct to
the Exhaust Adaptor after installation
is complete.
•
You must seal Exhaust Duct joints
using Duct Tape.
Install_ME11A7510DS_AA_DE68-04709A-00_EN+MES.indb 13
Install_ME11A7510DS_AA_DE68-04709A-00_EN+MES.indb 13
2021-06-16 10:55:29
2021-06-16 10:55:29
