17
GB
You can improve the quality of radio reception by:
Rotating the FM or AM(MW) aerial
Testing the positions of the FM and AM(MW) aerials before fixing them
permanently
If reception from a specific FM radio station is poor, press Mono/ST.
to switch from stereo mode to mono. The quality of the sound will be
improved.
You can listen to a stored radio station as follows:
Switch the system on by pressing Standby/On.
Select the TUNER function by pressing Tuner on remote control.
Select the required frequency band by pressing Tuner (Band) on the
remote control or TUNER (Band) again on the front panel.
Press the Tuning Mode button on the front panel of the unit, or the
Tune CD/Mode button on the remote control until “
PRESET
” is
displayed.
Turning Multi jog on the front panel left or right until the desired
station is found or press
/
to select the desired station.
or
Select the desired station by pressing the station number stored,
using the Tuning
or
button on the remote control.
Result: The desired station is now received.
If you do not want to store the radio station found, revert to Step 4
and search for another station.
Otherwise:
a Press Memory.
Result: The
PRGM
is displayed for a few seconds.
b Press Tuning Down and Up to assign a program number
between 1 and 15.
c Press Memory to store the radio station.
Result:
PRGM
is no longer flashed and the station is stored.
To store any other radio frequencies required, repeat Steps 3 to 8.
The PROGRAM function can be used to assign a new station
to an existing program number.
You can also use
Program/Set
button on the remote control
to instead
Memory
button in step
8
.
Selecting a Stored Station
8
9
Searching for and Storing the Radio
Stations (continued)
1
2
3
4
5
Improving Radio Reception
In Tuner mode
In manual tuning mode, you can use Multi Jog or /
button to manual search a radio station.
During Tuner auto searching, press
button to stop auto
searching.
In Preset tuning mode, you can use Multi Jog or /
button to search a stored radio station.
8
8
8
1
5
5
4
2,3
