GB
You can store up to:
15 FM stations
15 AM stations
Switch the system on by pressing STANDBY/ON.
Select the TUNER function by pressing TUNER BAND.
Select the required frequency band by pressing TUNER BAND again
on the front panel or TUNER (BAND) on the remote control.
Result: The appropriate indication is displayed:
FM
Frequency Modulation
AM(MW)
Medium Wave
To search for a
Press TUNING MODE
station...
Manually
Once or more times until
MANUAL
is displayed.
Automatically
Once or more times until
AUTO
is
displayed.
Select the station to be stored by:
Turning the MULTI JOG knob to the right or to the left to increase
or decrease the frequency respectively
or
Pressing TUNING/ALBUM
or
on the remote control
To scroll through the frequencies faster when searching
manually, hold down the
or
buttons.
The automatic search procedure may stop on a frequency that
does not correspond to a radio station. If this happens, use the
manual search mode.
Adjust the volume by:
Turning the VOLUME knob on the front panel
or
Pressing the or – buttons on the remote control
Select the FM stereo or mono mode by pressing MONO/ST.
If you do not want to store the radio station found, revert to Step 4
and search for another station.
Otherwise:
a Press TUNER MEMORY.
Result: The
PRGM
is displayed for a few seconds.
b Press
or
to assign a program number .
c Press TUNER MEMORY to store the radio station.
Result:
PRGM
is no longer flashed and the station is stored.
To store any other radio frequencies required, repeat Steps 3 to 8.
The PROGRAM function can be used to assign a new station
to an existing program number.
Searching for and Storing the Radio
Stations
1
2
3
4
5
6
7
8
9
In Tuner mode
In manual tuning mode, you can use MULTI JOG or /
button on the panel front to manual search a radio station.
During Tuner auto searching, press
button to stop auto
searching.
In Preset tuning mode, you can use MULTI JOG or /
button on the panel front to search a stored radio station.
17
6
5,8
4
2,3
5,8
1
7
5
5,8
8
4
6
