You can view the various functions available on your system
and you can also dim out for the window displayer.
Press the Demo/Dimmer button.
Result: The various functions available are listed in turn on the
display.
All these functions are described in detail in this booklet.
For instructions on how to use them, refer to the appropriate sec-
tions.
Press Demo/Dimmer again.
Result: The window displayer become dim out .
The window displayer can be used more longer at the dimmer
state.
Power turn on state ONLY
Press Demo/Dimmer again.
Result: The window displayer become normal display .
Your system is equipped with a clock which allows you to turn
your system on and off automatically. You should set the
clock:
When you first purchase the mini-compact system
After a power failure
After unplugging the unit
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
Switch the system on by pressing Standby/On.
Press Timer/Clock twice.
Result:
CLOCK
is displayed.
Press Enter.
Result: The hour flashes.
To...
Turn the Multi Jog knob to the...
Increase the hours
Right
Decrease the hours
Left
When the correct hour is displayed, press Enter.
Result: The minutes flash.
To...
Turn the Multi Jog knob to the...
Increase the minutes
Right
Decrease the minutes
Left
When the correct time is displayed, press Enter.
Result: The clock starts and is displayed, even when the system is in
standby mode.
You can display the time, even when you are using another
function, by pressing
Timer/Clock
once.
You can also use
Program/Set
button on the remote control
to instead
Enter
button in step
3
,
5
,
7
.
You can also use
/
buttons to instead
Multi Jog
knob in step
4
,
6
.
Setting the Clock
2
1
1
2
3
4
5
6
7
Viewing the Various Functions on Your
System and Dim out for Window Display
1
2
3,5,7
4,6
GB
9
3
