You can decide:
The order in which you listen to the tracks on the discs loaded
Which tracks you do not wish to listen to
You can program up to 24 tracks.
You must stop the compact disc player before selecting the tracks.
This feature can be combined with the Repeat function.
If the CD function is selected, stop the player by pressing
.
Load the selected CDs.
Press ENTER/PRGM..
Result: The following indications are displayed:
(01 = Program no., PR1 = Disc no., – – = Track no. on the disc)
If necessary, select the disc containing the required track by pressing
the corresponding DISC (1, 2, 3) button.
Select the required track by turning the MULTI JOG knob:
To the left to move back through the tracks
To the right to move forward through the tracks
Press ENTER/PRGM. to confirm your selection.
Result: The selection is stored and is displayed.
To select other tracks, repeat Steps 4 to 6.
Press CD/MP3-CD (
) to listen to the track selection in the order
programmed.
To...
Turn the MULTI JOG knob...
Listen to the current track again
One notch to the left
Listen to the previous track
Two notches to the left
Listen to the next track
One notch to the right
Skip forwards or backwards one
The appropriate number of
or more tracks
notches to the right or to the
left
To cancel the selection, press
.
Once if the compact disc player is stopped
If you open the compartment, the selection is cancelled.
If you select the number of a disc which is not loaded or a
track which does not exist on the CD, the selection skips to the
next programmed track.
You can also use the
/
buttons to select the required
tracks in step
5
,
9
.
ENG
13
ENG
12
You can repeat indefinitely:
A specific track on a compact disc.
All tracks on the compact disc selected.
All discs loaded in the carrousel
To repeat... Press REPEAT on the Remote
control once or more times
until...
The current track indefinitely
REPEAT 1
is displayed, and the
”1”
always flashes.
The selected disc
REPEAT 1
is displayed
All discs loaded
REPEAT ALL
is displayed
When you wish to stop the Repeat function, press REPEAT until
ALL
or
1
is displayed, or press
.
Repeating One or All Tracks
on the Compact Discs
1
2
+10
DEMO
DIMMER
SHUFFLE
REP A-B
P.SOUND P.BASS
USB/MP3-CD/CD
REPEAT
1,2
2
Function to skip through 10
tracks at a time
Press the +10 button briefly while playing back a
CD and MP3/WMA-CD . The track 10 tracks after the
current one will then be played back.
Example:
If you want to select track 43 during playback of track
5, press the
+10
button four times, and then press
the
button three times .
5
➝
10
➝
20
➝
30
➝
40
➝
41
➝
42
➝
43
When MP3/WMA-CD playback is selected again after your
CD player has been stopped or turned off, this function
allows playback from the start of the track that you last
listened to.
Press the
PROGRAM/SET
button while your MP3/WMA-CD is
being played . The
LAST ON
and
LAST OFF
may be repeatedly
selected.
Last Memory Function
(This function is only available during playback of MP3/WMA-CD.)
+10
DEMO
DIMMER
SHUFFLE
REP A-B
P.SOUND P.BASS
USB/MP3-CD/CD
REPEAT
SLEEP
MO/ST
MEMORY
ON/OFF
POWER
TIMER
+10
DEMO
DIMMER
SLEEP
MO/ST
MEMORY
ON/OFF
TIMER/CLOCK PROGRAM/SET
OPEN/
CLOSE
DISC
SKIP
1
2
3
4
5
6
8
9
10
Programming the Order of CD Playback
(This function is not available during playback of an MP3/WMA-CD.)
7
1,10
4
8
5,9
5,9
5,9
3,6
You can repeatedly play back a designated section of a CD.
Press the REP A-B button at the beginning of desired part.
START shows.
Press the REP A-B button at the ending of desired part.
END shows and section repeat is played 3 times.
Then it plays normal.
A-B Repeat Playback
1
2
+10
DEMO
DIMMER
SHUFFLE
REP A-B
P.SOUND P.BASS
REPEAT
SLEEP
MO/ST
MEMORY
ON/OFF
