3. MagicLAN Installation For
Windows 98SE/ME/2000/XP
We will explain the installation method for
SWL-2300U(USB Adapter)
.
3.1 Installation Overview
Here are some steps you will perform in establishing your wireless network connection:
1.
Install the Access Point at first. AP is needed in case of Infrastructure network
mode.
2.
You should install the Wireless LAN Card
(SWL-2300U).
3.
Install the software using the Installation CD.
4.
Install the network protocol(s) required to communicate on your network. Most
likely you will need the TCP/IP protocol.
3.2 Installation Procedure of Windows 98SE
Please follow the following steps one by one to install the
USB Adapter
successfully.
< Method 1 - Inserting card first >
1.
Insert the
USB Adapter
into the
USB slot
of your computer.
2.
Add New Hardware Wizard
appeared and the system looks for “
USB
Device
”. Press
NEXT
button and check if
Search for the best driver for your
device(recommended)
is slected and then press
NEXT
button . Insert the
MagicLAN Installation CD into the CD-ROM drive.
3.
Mark the
Specify a location
tap and type “
E:\Drivers
” right below in this
tap(Where E is the CD-drive of your PC).
Summary of Contents for MagicLAN SWL-2300U
Page 1: ...SAMSUNG MagicLAN SWL 2300U User Manual Rev 2 0 ...
Page 31: ......
