1.After the knock-down to Motor/Assy-Motor,
do the following.
2.Shut off gas supply.
3.Disconnect gas pipe.
4.Remove all the connectors.
5.Remove two screws (one at the front and the
other one at the back) securing Burner to Frame.
NOTE: The Igniter Bar is fragile.
So, take care when removing Burner Assy.
6.Remove the two screws attaching
the housing to Burner Bracket.
7.Remove Burner Assy from the unit.
Burner
(GAS MODEL)
FIGURE
DESCRIPTION
PART NAME
Drum-back
1.Remove 9 screws at the back of the unit and 2
screws at the Valve-Water.
2.Separate the Cover-Valve
3.Remove the terminal from the valve-Water
4.Separate Assy-Drum Back in Frame.
7. Disassembly & Reassembly
“
This document can not be used without Samsung's authorization”
68
Summary of Contents for M9900
Page 72: ......