English-
17
O
P E R AT I O N
3
Press the
ENTER
button.
The TV will begin
memorizing all of the
available channels.
The TV automatically cycles
through all of the available
channels and stores them in
memory. This takes about one to
two minutes.
Press
ENTER
at any time to
interrupt the memorization process
and return to the CHANNEL menu.
2
Press the
UP/DOWN
buttons to select
“Auto Program”.
1
First, select the correct
signal source (Air, STD,
HRC, IRC). See steps
1~2 on previous page.
Press the
MENU
button.
Press the
UP/DOWN
buttons to select
“Channel”, then press
the
ENTER
button.
4
After all the available channels are stored, the Auto
Program menu reappears. Press the EXIT button.
Ex) Press
to select channel 108.
Press the CH( / )button.
Only the channels stored in memory are selected.
Storing Channels in Memory (Automatic Method)
To check the channels stored in memory
To select channels over 100
13-29_EN 1/9/04 8:02 PM Page 17
