English-14
Inserting the Batteries in the Remote Control
You must insert or replace the batteries in the remote control when
you:
◆
Purchase your television
◆
Find that the remote control is no longer operating
correctly
1
Remove the cover on the rear of the remote control by pressing the
symbol downwards and then pulling firmly to remove it.
2
Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking care to
respect the polarities:
◆
+
on the battery against
+
on the remote control
◆
-
on the battery against
-
on the remote control
3
Replace the cover by aligning it with the base of the remote control
and pressing it back into place.
➣
Do not mix battery types, i.e. alkaline and monganese.
Switching On and Off
The mains lead is attached to the rear of your television.
1
Plug the mains lead into an appropriate socket.
Result:
A green Standby indicator appears on the front of your
television.
2
Press the
POWER
(
) button.
Result:
The screen is turned on and a green Standby indicator
disappears on the front of your television.
Your television can be placed in Standby mode, in order to reduce the
power consumption.
The Standby mode can be useful when you wish to interrupt viewing
temporarily (during a meal, for example).
1
Press the
POWER
(
) button.
Result:
The screen is turned off and a green Standby indicator
appears on the front of your television.
2
To switch your television back on, simply press the
POWER
(
)
button again.
➣
Do not leave your television in Standby mode for long periods of
time (when you are away on holiday, for example). Turn your
television off by unplugging from the mains and aerial.
SLEEP
DUAL I/II LIST/FLOF
CANCEL
P.SIZE
SIZE
SUBPAGE
PIP
SWAP
SOURCE
ON
TTX/MIX
V.DOLBY
PRE-CH
EXIT
MUTE
TV/VIDEO
TV/VIDEO
PC
PC
DISPLA
DISPLAY
STILL
STILL
P.STD
.STD
S.STD
.STD
Power
LOCATE
-/--
P
