English-8
Viewing the Connection Panel
(continued)
Connecting an Aerial or Cable Television Network
(depending on the model)
To view television channels correctly, a signal must be received by the set from one of the following sources:
- An outdoor aerial
- A cable television network
- A satellite network
Connecting DVD, VCR or DTV Set-Top Box
- Connect the RCA Cable to “AUDIO(L)” and “AUDIO(R)” on the rear of your set and the other end to
“Audio Out” connector of the DVD, VCR, or DTV Set-Top Box.
- Connect the RCA Cable to “Y”, “Pb”, and “Pr” on the rear of your set and the other end to
“Component Out” connector of the DVD, VCR, or DTV Set-Top Box.
Connecting Computer
- Connect the 15 Pin D-SUB connector to the PC video connector.
- Connect the stereo audio cable to ”Audio (ST)” on the rear of your set and the other end to “Audio Out” of
the sound card on your computer.
➣
15 Pin D-SUB connector
Pin
Separate H/V
Composite H/V
1
Red (R)
Red (R)
2
Green (G)
Green (G)
3
Blue (B)
Blue (B)
4
Grounding
Grounding
5
Grounding (DDC return)
Grounding (DDC return)
6
Grounding - Red (R)
Grounding - Red (R)
7
Grounding - Green (G)
Grounding - Green (G)
8
Grounding - Blue (B)
Grounding - Blue (B)
9
No connection
No connection
10
Grounding - Sync. / Self test
Grounding - Sync. / Self test
11
Grounding
Grounding
12
DDC - SDA (Date)
DDC - SDA (Date)
13
Horizontal Sync.
Horizontal/Vertical Sync.
14
Vertical Sync.
Not used
15
DDC - SCL (Clock)
DDC - SCL (Clock)
BN68-00438G-01Eng-AS15CO 6/17/03 1:48 PM Page 8
