English-55
How to Install the Wall Bracket
How to Attach the LCD TV to the Bracket
The LCD TV in the picture may not look exactly like yours.
(You assemble the plastic screw anchors and the screws the same way regardless of the model of your TV.)
Assemble the main body bracket as in the
pictures in 2. and below.
3
Put the four holders on the back of the TV
into the holes on the wall bracket, (1) lower
the TV, and (2) hang the TV on the bracket.
Fasten the TV securely to the wall bracket with
stickscrews as in (3) so that the two will not
separate.
4
Assemble the plastic screw anchors
and the screws. (See the picture below.)
1
Assemble the main body bracket as below
and put the plastic screw anchors in.
2
LCD TV
Wall bracket
Wall
1) Attach the plastic screw anchors to
each of the left/right brackets as in 1.
2) Assemble the bracket bars to the
left/right brackets as in the picture
on the left.
They are left-right and upper-lower
symmetry and the assembly direction
does not matter.
Warning
1. Installing a wall bracket must be done by a
qualified professional installer.
2. After you hang the LCD TV on the wall
bracket, check from both sides to see if the
plastic screw anchors are securely in
place.
3. Be careful not to get your fingers caught
during installation or while adjusting the
angle of the bracket.
4. The LCD TV may fall from the wall and
hurt someone if the wall bracket is not
attached securely to the wall. Make sure
the bracket is screwed tightly to the wall
.
BN68-00448G-00Eng.q 9/24/03 4:12 PM Page 55
