26
English
Other Information
Securing the TV to the Wall
Caution
: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your
children do not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious
injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install
the anti-fall device for safety purposes, as follows.
To avoid the TV from falling
✎
Since the necessary clamps, screws, and string are not supplied,
please purchase these additionally.
1.
Drive the screws into the clamps and firmly fasten them onto the
wall. Make sure the screws are firmly fixed into the wall.
✎
Screw Specifications
x
For a 19 ~ 27 inch LED TV: M4
2.
Remove the screws from the back center of the TV, put the screws
into the clamps, and then fasten the screws onto the TV again.
3.
Connect the clamps fixed onto the TV and the clamps fixed onto
the wall with a strong cable and then tie the string tightly.
✎
Verify all connections are properly secured. Periodically check
connections for any sign of fatigue for failure. If you have any doubt
about the security of your connections, contact a professional
installer.
✎
Install the TV near to the wall so that it does not fall backwards.
✎
It is safe to connect the string so that the clamps fixed on the wall
are equal to or lower than the clamps fixed on the TV. Untie the
string before moving the TV.
Wall
[UD5003-ZA]BN68-03703A-ENG.indb 26
2011-04-27 �� 9:07:57
