English - 6
Storing Channels in memory (automatic method)
.
Press the
mEnu
button to display the menu.
Press the ▲ or ▼ buttons to select “Channel”, then press the
EntEr
button.
.
Press the ▲ or ▼ buttons to select "Auto Program", then press the
EntEr
button.
.
Press the ▲ or ▼ buttons to select the antenna connection, then press the
EntEr
button.
Air: “Air” antenna signal. / Cable: “Cable” antenna signal. /
Air+Cable: “Air” and “Cable” antenna signals.
.
When selecting the Cable TV system: Press the
EntEr
button to start the auto
program. By default, the cable TV system is set to “STD”. If you want to select
another type of cable system, press the ▲ or ▼ button to select “STD”, “HRC” or
“IRC”.
STD, HRC and IRC identify various types of cable TV systems. Contact your
local cable company to identify the type of cable system that exists in your
particular area. At this point the signal source has been selected.
Press the
EntEr
button to start the auto program.
To stop the search before it has finished, press the
EntEr
button with stop
selected.
.
After all the available channels are stored, the “Auto Program” menu reappears.
Press the
ExIt
button to exit.
Alternately, you can press the
auto proG.
button on the remote control to bring
up the Auto Program menu.
move
Enter
return
antenna
: Cable
►
auto program
►
Clear Scrambled Channel
►
Channel list
►
name
►
fine tune
►
Signal Strength
►
lna
: off
►
Channel
move
Enter
return
tV
move
Enter
return
Select the antennas to memorize.
Channel
move
Enter
return
tV
Start
air
Cable
air+Cable
Start
Start
plug & play
auto program is complete.
6 Channels were memorized.
air : 6, Cable : 0.
auto program
Cable 0
0%
Stop
Enter
return
auto program in progress.
move
Enter
return
Selects a cable signal type for your location.
auto program
move
Enter
return
tV
analog
Start
Std
hrC
IrC
digital
Std
hrC
IrC
oK
Enter
return
BN68-01167A-Eng-00.indd 16
2007-02-09 �� 9:21:26
