English-16
Memorizing the Channels
Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable channels.
After the available channels are memorized, use the CH
or CH
buttons to scan through the channels.
This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels:
selecting a broadcast source, memorizing the channels (automatic).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the
TV (i.e. an antenna or a cable system).
1.
Press the
MENU
button to display the menu.
Press the
or
buttons to select “Channel”, then press the
ENTER
button.
2.
Press the
ENTER
button select “Antenna”.
Press the
or
buttons to select “Air” or “Cable”, then press the
ENTER
button.
Press the
EXIT
button to exit.
Storing Channels in Memory (Automatic Method)
1.
Press the
MENU
button to display the menu
.
Press the
or
buttons to select “Channel”, then press the
ENTER
button.
2.
Press the
or
buttons to select “Auto Program”, then press the
ENTER
button.
3.
Press the
or
buttons to select the antenna connection, then press the
ENTER
button.
Air: “Air” antenna signal. / Cable: “Cable” antenna signal. /
Air+Cable: “Air” and “Cable” antenna signals.
4.
After all the available channels are stored, the “Auto Program” menu reappears.
Press the
EXIT
button to exit.
Alternately, you can press the
AUTO PROG.
button on the remote control to bring up
the Auto Program menu.
BN68-01001D-X1Eng.qxd 6/30/06 2:17 AM Page 16
