English-14
6.
Press the
ENTER
button.
Press the
or
buttons to select “Yes” or “No”, then the
ENTER
button.
“Select the time zone in which you live” menu is automatically displayed.
7.
Press the
or
buttons to highlight the time zone for your local area (and to
move the highlight to the appropriate time zone on the map of the United States).
Press the
ENTER
button. If you have received a digital signal, the time will
be set automatically.
If not, see page 40 to set the clock.
8.
The message “Enjoy your watching.” is displayed.
When you have finished,press the
ENTER
button.
1.
Press the
MENU
button.
Press the
or
buttons to select “Setup”, then press the
ENTER
button.
2.
Press the
or
buttons to select “Plug & Play”.
Press the
ENTER
button.
For further details on setting up options, refer to the previous page.
Plug & Play can only be accessed in the TV mode.
If you want to reset this feature...
Changing Channels
1.
Press the
CH
or
CH
button to change channels.
When you press the
CH
or
CH
button, the TV changes channels in sequence.
You will see all the channels that the TV has memorized. (The TV must have memorized
at least three channels). You will not see channels that were either erased or not
memorized. See page 16 to memorize channels.
Using the Channel Buttons
1.
Press the
PRE-CH
button.
The TV will switch to the last channel viewed.
To quickly switch between two channels that are far apart, tune to one channel, then use
the number button to select the second channel. Then use the
PRE-CH
button to quickly
alternate between them.
Using the PRE-CH Button to select the Previous Channel
BN68-00998A-03Eng.qxd 6/28/06 7:29 PM Page 14