Samsung LH55QMRTBGCXZA User Manual Download Page 92

Page: 92 / 116

Eco Solution

Power Saving Mode

Eco Sensor

Screen Lamp Schedule

No Signal Power Off

Auto Power Off

Minimum Backlight

Off

15 minutes

Off (Recommended)

The displayed image may differ depending on the model.

Screen Lamp Schedule

Enable or disable the lamp schedule.

•

Off

Schedule1, Schedule2

Time

The panel brightness will change to the brightness set in

Lamp

at a specified time.

Lamp

Adjust the panel brightness. A value closer to 100 makes the panel brighter.

•

100

No Signal Power Off

Save power by turning the product off when no signal is received from any source.

This function may not be supported depending on the model.

This function does not operate if the display is in the standby mode.

The product will automatically power off at a specified time. The time can be changed as required.

Auto Power Off

Choose how long the display will wait before turning off after no user interaction is detected.

Summary of Contents for LH55QMRTBGCXZA





















































































































Search results

Summary of Contents for LH55QMRTBGCXZA

Reviews:

Brands by name

Popular brands

Samsung LH55QMRTBGCXZA, User Manual

Search results

Summary of Contents for LH55QMRTBGCXZA

Reviews:

Brands by name

Popular brands