Samsung LE37M86BD, Manual

Page: 58 / 191

english - 56
Setting up
the following settings are to use functions.
using the Function
1.
Press the button.
Press the ▲ or ▼ button to select Setup , then press the
enter/oK button.
2. Press the enter/oK button to select (hDmI-CeC) ,
then press the enter/oK button.
. Press the ▲ or ▼ button to select on , then press the enter/
oK button.
The (HDMI-CEC) function is enabled.
If you select off , (HDMI-CEC) is disabled.
When the (HDMI-CEC) function is disabled, all the
related operations are deactivated.
turning an Device off automatically when the tV is turned off
1.
Pre ss the ▲ or ▼ button to select auto turn off , then press
the enter/oK button.
2. Press the ▲ or ▼ button to select on , then press the enter/
oK button.
The Auto turn off function is enabled.
If you select off , the Auto turn off function is canceled.
Press the exIt button to exit.
The Select Device setting of the TV remote control is to be set to
TV to use the function.
If you set Auto Turn Off to On, connected external devices are also turned off when the TV is turned off.
However, if the device is recording, it may not be turned off.
➣
➣
➣
➣
➣
➣
➣
Scanning and Switching between Devices
1.
Press the button.
2.
Press the ▲ or ▼ button to select
Select Device
, then press
the
enter/oK
button.
.
Press the ▲ or ▼ button to select to a particular device and
press the
enter/oK
button.
It is switched to the selected device.
.
If you cannot find a device you want, press the ▲ or ▼ button
to select
Searching Connections
, then press the
enter/oK
button.
The meassage
Configuring connection...
is
displayed. When searching devices completes, the connected
devices are listed in the menu.
Switching to the selected devices may take up to 2 minutes. You
cannot cancel the operation during the switching operation.
The time required to scan for devices is determined by the number
of connected devices.
When the device scan is complete, the number of found devices
is not displayed.
Although the TV automatically scans devices when it is turned on
using the PoWer button, devices connected when the TV is on or under a specific circumstance are not
displayed in the device list. Therefore select Searching Connections menu to search devices.
If you have selected external input mode by pressing the SourCe button, you cannot use the
function. Make sure to switch to an device by using the button.
➣
➣
➣
➣
➣
enter move
View tV
Select Device

record

menu on Device

Device operation

receiver :off 
Setup 
air 28
exit
Setup
(hDmI-CeC) : off
auto turn off : off
Searching Connections
enter return move
off
on
Setup
(hDmI-CeC) : on
auto turn off : off
Searching Connections
enter return move
off
on
Setup
(hDmI-CeC) : on

auto turn off : on

Searching Connections

enter return move
enter move
View tV
Select Device 
record 
menu on Device

Device operation

receiver :off

Setup

air 28
return
DVDr1
DVDr2
DVD1
DVD2
BN68-01186B-Eng-0309.indd 56 2007-03-14 �� 12:55:46