Viewing the Connection Panel
Connecting an Aerial or Cable Television Network
To view television channels correctly, a signal must be received by the set from one of the following sources:
- An outdoor aerial
- A cable television network
- A satellite network
Connecting Component Devices (DTV/DVD)
- Connect component video cables to component connector (
“P
R
”, “P
B
”, “Y”
) on the rear of your set and
the other ends to corresponding component video out connectors on the DTV or DVD.
- If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to
the DTV (or DVD) and connect the DTV (or DVD) to component connector (
“P
R
”, “P
B
”, “Y”
) on your set.
- The Y, P
B
and P
R
connectors on your component devices (DTV or DVD) are sometimes labeled Y, B-Y
and R-Y or Y, Cb and Cr.
- Connect RCA audio cables to “
R
-
AUDIO - L
” on the rear of your set and the other ends to
corresponding audio out connectors on the DTV or DVD.
Connecting External A/V Devices
- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
- Connect RCA audio cables to “
R
-
AUDIO - L
” on the rear of your set and the other ends to
corresponding audio out connectors on the A/V device.
- Headphone may be connected to the headphone output (
) on the rear of your set. While the
headphone is connected, the sound from the built-in speakers will be disabled.
SERVICE
- Connector for engineer.
Connecting Set-Top Box, VCR or DVD
- Connect the VCR or DVD SCART cable to the SCART connector of the VCR or DVD.
- If you wish to connect both the Set-Top Box and VCR (or DVD), you should connect the Set-Top Box
to the VCR (or DVD) and connect the VCR (or DVD) to your set.
Input/Output Specification
Connector
SCART 1 (EXT 1)
SCART 2 (EXT 2)
Video
Audio (R/L)
S-Video
RGB
Video+Audio (R/L)
Only TV Out
Monitor Out
(TV/Ext. 1/Ext. 2/AV/S-VHS)
Input
Output
English-6
01 BN68-00956E-02Eng.qxd 11/30/05 12:18 AM Page 6
