English - 5
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
✎
Preset: Connecting the mains and antenna.
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWER
P
button.
Plug & Play
is available only when the
Source
is set to TV.
✎
To return to the previous step, press the Red button.
1
Selecting a language
Press the
▲
or
▼
button, then press the
ENTER
E
button.
Select the desired OSD (On Screen Display) language.
(Not available in some locations)
P
POWER
Selecting
Store Demo
or
Home Use
Press the
◄
or
►
button, then press the
ENTER
E
button.
Select the
Home Use
mode.
Store Demo
mode is for retail environments.
To return the unit’s settings from
Store Demo
to
Home Use
(standard):
Press the volume button on the TV. When the OSD volume is displayed,
press and hold
MENU
for 5 sec.
Store Demo
is only for shop display. If you select it, several functions are not
able to use. Please select
Home Use
when you watch at home.
2
Selecting a country
Press the
▲
or
▼
button, then press the
ENTER
E
button.
Select the appropriate country. (Not available in some locations)
Selecting an area
Press the
▲
or
▼
button, then press the
ENTER
E
button.
Select the appropriate area. (Not available in some locations)
3
Setting the
Clock Mode
Set the
Clock Mode
automatically or manually.
✎
If you select the
Auto
, select the time zone which you live. (Australia only)
4
Selecting a channel
Select the desired broadcasting signal.
Press the
◄
or
►
button, then press the
ENTER
E
button.
For more information, refer to
Channel
→
Auto Tuning
.
Press the
ENTER
E
button at any time to interrupt the memorisation process.
5
Enjoy your TV.
Press the
ENTER
E
button.
If You Want to Reset This Feature...
Select
System
-
Plug & Play
(Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0”. If you want to
change the PIN number, use the
Change PIN
function.
You should do
Plug & Play
(
MENU
→
System
) again at home although you did in shop.
✎
If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets
the PIN to “0-0-0-0” :
MUTE
→
8
→
2
→
4
→
POWER
(on)
VHF/UHF Antenna
Cable
or
TV Rear Panel
✎
The position of power input port may differ depending on the model.
[LD403-503-XY]BN68-03718A-ENG.indd 5
2011-04-29 �� 8:24:56
