4-8
4. Troubleshooting
4-1-2. No Video (Analog PC signal)
Symptom
Audio is normal but no picture is displayed on the screen.
-
Major
checkpoints
Check the PC source
Check the Arsenal, Check the Chelsea.
This may happen when the LVDS cable connecting the Main Board and the Panel is disconnected.
-
-
-
Diagnostics
No
Check CN1204, PC cable.
Change the Main Assy
No
Does the digital data appear at
R1030F (FRC_M_HSYNC)
Pin #19,20,34,35 (LVDS Data clk)
of LVDS connector?
Power indicator LED is off.
Lamp(Backlight) on, no video?
No
Check the PC source and
check the connection of D-SUB?
Does the signal appear at
C464, C465, C466, R1250, BD1205
(R, G, B, H, V) of IC501?
No
No
Please, Contact Tech support.
Check the LVDS cable?
Replace the LCD panel?
Check IC601
Change the Main Assy
Yes
Yes
Yes
Input the analog
PC signal properly.
Yes
1
2
Check a set in the
‘Stand-by mode’ or ‘DPMS mode’.
Caution
Make sure to disconnect the power before working on the IP board.
Summary of Contents for LA32B650T1R
