background image

English - 8

SETUP

Configuring the Setup Menu

Language

You can set the menu language.

Time

Clock

Setting the clock is necessary in order to use the various timer features of the TV.

The current time will appear every time you press the 

INFO

 button.

If you disconnect the power cord, you have to set the clock again.

You can set the day, month, year, hour and minute directly by pressing the number buttons on the remote control.

Sleep Timer

The sleep timer automatically shuts off the TV after a preset time (30, 60, 90, 120, 150 and 180 minutes).

Press the 

TOOLS

 button to display the Tools menu. You can also set the sleep timer by selecting 

Tools → Sleep Timer

.

To cancel the 

Sleep Timer

 function, select 

Off

.

Timer  / Timer  / Timer 

Three different on / off timer settings can be made.

You must set the clock first.

On Time

Set the hour, minute, am/pm and activate / inactivate.

(To activate timer with the setting you’ve chosen, set to 

Activated

.)

Off Time

Set the hour, minute, am/pm and activate / inactivate.

(To activate timer with the setting you’ve chosen, set to 

Activated

.)

Repeat

Select 

Once, Everyday, Mon~Fri, Mon~Sat

 or 

Sat~Sun

.

Volume

Select the desired turn on volume level.

Programme

When the On Timer is active, you can turn on a specific channel.

You can set the hour, minute and channel by pressing the number buttons on the remote control.

Auto Power Off

When you set the timer On, the television will eventually turn off, if no controls are operated for 3 hours after the TV was 

turned on by the timer. This function is only available in timer On mode and prevents overheating, which may occur if a TV 

is on for too long time.

Child Lock → Off / On

This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programme by muting out video 

and audio.

Before the setup screen appears, the PIN number input screen appears. Enter your 4 digit PIN number.

The default PIN number of a new TV set is 0-0-0-0. You can change the PIN by selecting 

Change PIN

 from the menu.

You can lock some channels in Channel List. (refer to page 9)

Child Lock

 is available only in TV mode.

¦

O

N

T

N

N

N

N

N

N

N

Plug & Play 

 

Language 

: English 

Time 

 

Child Lock 

: On 

Change PIN

Game Mode 

: Off 

Melody 

: Off 

Energy Saving 

: Off 

PIP 

 

U

 Move          

E

 Enter          

R

 Return

TV

Setup

BN68-02101L-00Eng.indd   18

2009-05-11   �� 2:32:30

Summary of Contents for LA22B350





























Reviews: