Samsung L Series, User Manual

Page: 57 / 78

《 56 》
■
If you enable Quick View before capturing an image, you can view the image
you just captured on the LCD monitor for the duration set in the [Quick View]
setup. Quick view is possible only with still images.
[Off] : The quick view function can’t be
activated.
[0.5, 1, 3sec] : The captured image is briefly
displayed during the selected time.
Initialisation
■ All camera menu and function settings will be restored to their default values.
However, values for DATE / TIME, LANGUAGE, and VIDEO OUT will not be
changed.
If [No] is selected : Settings will not be restored to
their defaults.
If [Yes] is selected : All settings will be restored to
their defaults.
LCD brightness Selecting Video out type
■ The Movie output signal from the camera can be
NTSC or PAL. Your choice of output will be
governed by the type of device (monitor or TV, etc.)
to which the camera is connected. PAL mode can
support only BDGHI.
● NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.
● PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany,
U.K., Holland, Italy, Kuwait, Malaysia, New Zealand, Singapore,
Spain, Sweden, Switzerland, Thailand, Norway.
INFORMATION
● When using a TV as an external monitor, you will need to select the external
or AV channel of the TV.
● There will be a digital noise on the external monitor, but it is not a malfunction.
● If the image is not in the centre of the screen, use the TV controls to centre it.
● The menu functions are the same as those indicated on the LCD monitor.
INFORMATION
Yellow - Video
White - sound
Quick view
Selecting Video out type
■ You can adjust the LCD brightness.
SETUP
USB
LCD
Video Out
Quick View
Reset
Back: Set:OK
NTSC
PAL
SETUP
SOund
USB
LCD
Video Out
Quick View
Back: Set:OK
Dark
Normal
Bright
SETUP
USB
LCD
Video Out
Quick View
Reset
Back: Set:OK
off
0.5 sec
1 sec
3 sec
SETUP
USB
LCD
Video Out
Quick View
Reset
Back: Set:OK
No
Yes