Samsung ITP-5107SIP User Manual Download Page 44

Page: 44 / 86

ANSWERING THE DOOR PHONE

When you are programmed to receive calls from a door phone:

•

You will receive three short rings repeated.

•

Lift the handset. You are connected to the door phone.

•

If an electric door lock release is installed, dial

to unlock the door.

CALLING THE DOOR PHONE/
ROOM MONITOR

You may call the door phone and listen to what may be happening outside or in
another room.

•

Dial the extension number of the door phone.

•

You will be connected to the door phone and you can listen or have a con-
versation.

•

If an electric door lock release is installed, dial

to unlock the door.

NOTE: If the Hot Keypad feature has been turned off, you must first lift the handset
or press the

SPEAKER

button.

EXECUTIVE/SECRETARY HOT LINE

If programmed, an executive and a secretary can have a hot line between them.
When the executive station is in the DND mode, all of its calls will ring the secre-
tary station.

•

Either person can press the

BOSS

button to make a voice call to the other sta-

tion.

•

Using the hot line will override DND at the other station. This button will light
red when the other station is in use.

To transfer a call to a Boss in DND:

•

Press the

TRANSFER

button followed by the

BOSS

button.

•

Wait for the

BOSS

to answer to announce the call and hang up to complete

the transfer

•

Hang up to complete a blind transfer after pressing the

BOSS

button.

5107S_keyset.qxp 5/9/2006 9:56 AM Page 43

Summary of Contents for ITP-5107SIP























































































Search results

Summary of Contents for ITP-5107SIP

Reviews:

Related manuals for ITP-5107SIP

Brands by name

Popular brands

Samsung ITP-5107SIP, User Manual

Search results

Summary of Contents for ITP-5107SIP

Reviews:

Related manuals for ITP-5107SIP

Brands by name

Popular brands