Samsung iPolis SNO-5080R User Manual Download Page 13

Page: 13 / 94

English

_13

●

INSTALLATION & CONNECTION

TO ADJUST THE ZOOM FACTOR OR FOCUS

Loosen the front cover as shown.

Loosen the zoom/focus lever slightly.

Position the zoom/focus lever to WIDE (NEAR) or TELE (FAR) as appropriate.

Then, tighten the zoom/focus lever to fix the adjusted position.

Turn the front cover to tighten it.

To ensure seamless waterproofing, tighten up the front cover by turning it to the end.
When fixing the front cover, ensure that the triangle of the main body faces the triangle of the
front cover.

Use the lever to adjust the zoom factor or focus, and turn the lever clockwise to fix it.

Before you can adjust the zoom factor/focus of the lens, loosen and remove the front cover.






installation & connection

Front cover

Zoom Lever

Focus Lever

WIDE

↔

TELE

FAR

↔

NEAR

Summary of Contents for iPolis SNO-5080R































































































Search results

Summary of Contents for iPolis SNO-5080R

Reviews:

Related manuals for iPolis SNO-5080R

Brands by name

Popular brands

Samsung iPolis SNO-5080R, User Manual

Search results

Summary of Contents for iPolis SNO-5080R

Reviews:

Related manuals for iPolis SNO-5080R

Brands by name

Popular brands