Samsung iES4028F, Management Manual

Page: 517 / 712

Access Control List Commands
4-181
4
show ip access-list
This command displays the rules for configured IP ACLs.
Syntax
show ip access-list { standard | extended } [ acl_name ]
• standard – Specifies a standard IP ACL.
• extended – Specifies an extended IP ACL.
• acl_name – Name of the ACL. (Maximum length: 16 characters,
no spaces)
Command Mode
Privileged Exec
Example
Related Commands
permit, deny 4-178
ip access-group (4-181)
ip access-group
This command binds a port to an IP ACL. Use the no form to remove the port.
Syntax
[ no ] ip access-group acl_name in
• acl_name – Name of the ACL. (Maximum length: 16 characters,
no spaces)
• in – Indicates that this list applies to ingress packets.
Default Setting
None
Command Mode
Interface Configuration (Ethernet)
Command Usage
• A port can only be bound to one ACL.
• If a port is already bound to an ACL and you bind it to a different ACL, the
switch will replace the old binding with the new one.
Console#show ip access-list standard
IP standard access-list david:
permit host 10.1.1.21
permit 168.92.0.0 255.255.255.0
Console#